텅스텐 카바이드의 Diff 공

소개

텅스텐 카바이드 볼 are recommended in diffs that don't have prepped rings (sanding the rings lightly on a granite counter top with some 600 grit sandpaper or from a company that does this already). Stock rings typically have a polished finish which can be too slippery for ceramic balls if you don't have patience to set the diff correctly. Our 텅스텐 카바이드 볼 is smoother than the stock steel balls but not as smooth as a ceramic ball, this slight imperfection allows the 텅스텐 카바이드 볼 to perform on the polished rings and allows for a wider tuning window.

텅스텐 카바이드의 Diff 공s are commonly used in the Team Losi and Team Associated differentials. Please check your manual for the correct size.

풍모

Durable and resistance against wear, shock and impact

텅스텐 카바이드의 Diff 공s can last for race after race without being replaced

Each set of diff ball is matched for consistent concentricity

All diff balls are Grade 10

신청

텅스텐 카바이드의 Diff 공s, 2mm (6)" is used in the following

1/10 2WD Short Course Truck

1/10 2WD Stadium Truck

1/10 4WD Buggy

1/10 2WD Buggy

장점

텅스텐 카바이드의 Diff 공s have many advantages over standard steel balls, such as decreased weight, higher RPM capabilities, increased wear resistance, as well as reduced friction and vibration.

High Speed: 텅스텐 카바이드의 Diff 공s can reach a high resistance level with grease lubrication, due to reduced slip, less wear and less heat.

Lightweight: The weight of tungsten is lighter than steel, which decreases the centrifugal force and overall weight.

Long Service Life: The service life of 텅스텐 카바이드 볼 is 3 to 5 times longer than that of steel in similar operations.

High Rigidity: The tungsten is far greater than that of steel, this dramatically increases the rigidity of the balls.

Low Friction: Tungsten materials have a low friction force. Even under the conditions of less lubrication, the surfaces are extremely smooth.Wear Resistant: The tungsten can will increases the wear-resistance.